| Disponibilidad | bajo petition | |
| Aplicación | Área de trabajo, correas de permutación | |
| IPTV; HbbTV 2.0.n | ||
| IEEE 802.3: 10Base-T; 100Base-T; 1000Base-T; 10GBase-T | ||
| IEEE 802.5: ISDN; TPDDI; ATM; CATV; Broadband Video; PoE/PoE+ | ||
| Interior y Exterior Colocación | ||
| según la Norma | EN50288-10-2 | |
| EN50173 | ||
| EIA-TIA 568 | ||
| CEI-UNEL 36762 | ||
| CARACTERISTÍCAS CONSTRUCTIVAS | ||
| Conductor interno | Ø mm | 0,60 7x0,20 |
| material | Cu | |
| Dieléctrico | Ø mm | 1,30 |
| material | PEE | |
| Lamina | material | AP |
| Cubierta externa | Ø mm | 7,8 |
| material | LSZH | |
| CARACTERISTÍCAS MECÁNICAS | ||
| Peso del cobre | kg/km | 17,7 |
| Peso del cable | kg/km | 56,0 |
| Min radio de curvatura x 1/n | mm | 30/60 |
| Fuerza máx. de tracción | N | 100 |
| CARACTERISTÍCAS ELÉCTRICAS | ||
| Impedancia | Ohm | 100±5@100 MHz |
| Capacidad mutua (@800Hz) | pF/m | 43 |
| Coeficiente de Velocidad | % | 79 |
| Atenuación (a 20°C) | ||
| a 1 MHz | dB/10m | 0,3 |
| a 10 MHz | dB/10m | 0,9 |
| a 20 MHz | dB/10m | 1,3 |
| a 31,25 MHz | dB/10m | 1,6 |
| a 62,5 MHz | dB/10m | 2,4 |
| a 100 MHz | dB/10m | 3,0 |
| a 155,5 MHz | dB/10m | 3,6 |
| a 250 MHz | dB/10m | 4,4 |
| a 300 MHz | dB/10m | 4,8 |
| a 500 MHz | dB/10m | 6,4 |
| NEXT | ||
| a 1 MHz | dB | 90,0 |
| a 10 MHz | dB | 90,0 |
| a 20 MHz | dB | 85,0 |
| a 31,25 MHz | dB | 85,0 |
| a 62,5 MHz | dB | 80,0 |
| a 100 MHz | dB | 80,0 |
| a 155,5 MHz | dB | 80,0 |
| a 250 MHz | dB | 75,0 |
| a 300 MHz | dB | 75,0 |
| a 500 MHz | dB | 70,0 |
| Atenuación de Coppia | dB | > 45 |
| Impedencia de trasferencia (Zt) | ||
| 1 MHz | mOhm/m | < 11 |
| 10 MHz | mOhm/m | < 5 |
| 30 MHz | mOhm/m | < 3 |
| 100 MHz | mOhm/m | < 2,5 |
| Eficacia del blindaje (SA) | ||
| a 30 - 100 MHz | dB | > 70 |
| a 100 - 500 MHz | dB | > 50 |
| Resistencia cc conductor | Ohm/km | 130,0 |
| Resistencia de bucle | Ohm/km | 260,0 |
| Tensión aislamiento funda (CC, 1 min) | kV | 1,0 |
Cat. 6a FlexibleU/FTP 4x2xAWG26/7